Bad lighting on a vehicle can be extremely dangerous to drive with, especially at night and during inclement weather. Luckily, there are a few things you can do to save your exterior lamp fixtures. If your car, truck, van, or SUV has a cracked light or turn signal cover on the back, you need to address it immediately. Leaving it unchecked can allow water to enter the housing unit, which can cause some serious damage to the electrical system. The light compartment is an important element, and you can temporarily fix a crack with something as simple as tape. You should select the red or orange type of tape that is made specifically for this purpose. It will prevent moisture from entering the casing. Next, if you have a bulb that is burnt out, you should replace it as soon as possible. When you do this, it is recommended that you thoroughly clean any corroded or dirty sockets. You can do this with a wire brush or some steel wool. After you have loosened any grime, you need to wipe the socket clean before installing the new bulb. Are you ready for new lighting? Contact Ford Parts BC to start an online order!